My engine runs smoothly, but it is really weak.

1981 VOLKSWAGEN RABBIT
283 MILES
Avatar
LACHWHISTLE
  • MEMBER
  • 1 POST
I drive a 1981 vw rabbit truck (diesel). The truck has been running fine for 8 months.

However, when i took her out today, the engine was very, very weak.
I had trouble getting out of my steep driveway, which normally is no problem.

The truck still feels smooth, but when I reached the peak point of a gear today, it was noticeably weaker than the day before. I live in a hilly area, and normally I can get up hills no problem, using 2nd gear sometimes on the really steep parts.

Today I had to cruise very slowly in 1st gear to get up the hills. It was like riding a lawn mower.

Any ideas on the problem? I recently rebuilt this truck
(new (used) engine, radiator,etc.) so I would like to try and fix the problem myself.
May 6, 2012 at 11:58 PM
Advertisement
Avatar
FIXITMR
  • ASE Certified Mechanic
  • 9,990 POSTS
  • ASE Certified Mechanic
check your throttle linkage.
May 7, 2012 at 12:04 AM
Avatar
RIVERMIKERAT
  • ASE Certified Mechanic
  • 6,110 POSTS
  • ASE Certified Mechanic
Do you smell anything abnormal? What happens if you get going in first and shift into third or fourth? Try disconnecting the catalytic converter and see if that makes any difference.
May 7, 2012 at 12:06 AM
Avatar
ASEMASTER6371
  • ASE Certified Mechanic
  • 52,796 POSTS
  • ASE Certified Mechanic
could also be timing from the injector pump. remove the covers and verify the timing marks.

Roy
May 7, 2012 at 2:50 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.