1981 Dodge Truck stalling

Tiny
FASEDDIE
  • MEMBER
  • 1981 DODGE TRUCK
  • 3.7L
  • 6 CYL
  • 2WD
  • AUTOMATIC
Set idle to spec, but dies in reverse only. Maybe a low/reverse band adjustment?
Wednesday, April 30th, 2014 AT 2:29 PM

3 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
It's probably a carb problem unless the carb has been updated to be able to use alcohol in fuels. It needs an overhaul
Was this
answer
helpful?
Yes
No
Wednesday, April 30th, 2014 AT 3:14 PM
Tiny
FASEDDIE
  • MEMBER
  • 2 POSTS
New carb! Did the same thing with old one. It only dies in reverse. And I don't use the methanol.
Was this
answer
helpful?
Yes
No
Thursday, May 1st, 2014 AT 4:36 AM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
I you use any gas used today it has alcohol in it depending on where you are it can have 10% or 15%. But, have you tried adjusting the air mix? Screw in screw lightly seat an dback off about a turn and a half. Make sure carb is tight onmanifold with no vacuum leaks. That includes checking hoses, etc. It shold also idle about 750-800 in gear.
Was this
answer
helpful?
Yes
No
Thursday, May 1st, 2014 AT 5:15 AM

Please login or register to post a reply.

Sponsored links