1979 Chevrolet Camaro starting problems on Chevy 350

Tiny
FIREBIRDROBBIE
  • MEMBER
  • 1979 CHEVROLET CAMARO
On my race car im having trouble starting it I have spark and distributer points at number 1 cylinder. But don't even try to start
I have a new carb, cam, and distributer I take the battery out of my daily driver to try to start.
Tuesday, June 18th, 2013 AT 6:04 PM

8 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Are you getting fuel to carb? Got compression? Have spark to plugs or not
Was this
answer
helpful?
Yes
No
Saturday, August 17th, 2019 AT 4:50 PM
Tiny
FIREBIRDROBBIE
  • MEMBER
  • 5 POSTS
I have good fuel and oil pressure. Good spark I got good compression as well turns over very easy
Was this
answer
helpful?
Yes
No
Saturday, August 17th, 2019 AT 4:50 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
What kin dof ignition system do you have? Is compression good on all cylinders
if you are getting fue an dspark it shold start unless timing chain jumped
Was this
answer
helpful?
Yes
No
Saturday, August 17th, 2019 AT 4:50 PM
Tiny
FIREBIRDROBBIE
  • MEMBER
  • 5 POSTS
I have a toggle switch for on and off and then push button start I have only checked number one spark plug and will probly pull the timing cover tonight and check it
Was this
answer
helpful?
Yes
No
-1
Saturday, August 17th, 2019 AT 4:50 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Just put to tdc and put dist to same see if it'smoved. If you have the spring style clip tohold dist throw that away and get a solid piece at high revs they let the dist jump up and out of time. Also check to make sure power is going through your toggle switch
Was this
answer
helpful?
Yes
No
Saturday, August 17th, 2019 AT 4:50 PM
Tiny
FIREBIRDROBBIE
  • MEMBER
  • 5 POSTS
I think maybe if found the problem my bottom timing gear has 3 keyways and right now its on the advanced key so hopefully tomorrow I can get it set right and get it running
Was this
answer
helpful?
Yes
No
Saturday, August 17th, 2019 AT 4:50 PM
Tiny
FIREBIRDROBBIE
  • MEMBER
  • 5 POSTS
Well thank you for the help ive got one more question. Is my timing to far advanced or not enough when it shots flames through carb.
Was this
answer
helpful?
Yes
No
Saturday, August 17th, 2019 AT 4:50 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
It's out of time period to far advanced will do that as well as retarded.
Was this
answer
helpful?
Yes
No
Saturday, August 17th, 2019 AT 4:50 PM

Please login or register to post a reply.

Sponsored links