why is my 1978 350 not oiling fully on the passanger side of the motor

1978 CHEVROLET SILVERADO
78,000 MILES
Avatar
COLTEN_SIMONDS
  • MEMBER
  • 13 POSTS
i changed pushrods and rockerarms and the passanger side of the motor is not oiling the same as the driver side. i also adjusted the valves on passanger side.
Oct 13, 2012 at 12:02 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
HMAC300
  • CAR REPAIR CONTRIBUTOR
  • 48,601 POSTS
you could have them to tight, loosen them up take out all play with the valves closed or tdc for each cylinder and then after taking the play out where you can still turn the pushrods go down 1 turn.
Oct 13, 2012 at 12:32 AM
Advertisement