Timing sbc with mild build

2000 TAHOE ONE

MEMBER
1978 CHEVROLET MALIBU
20,000 MILES

What's the best way to time sbc with mild build (what degree ) just put 270 comp cam accell hei distributer gear drive edelBrock 650 carb and air gap rpm intake with 2000 stall car got hesitation when stomp on gas never adjust carb since adding all that should I and if so how thanks for any help

6 Replies

RASMATAZ

MECHANIC
75,992 POSTS

Vacuum time it and then readjust the A/F mix and curb idle and check the Carb's accelerator pump circuit-

Also refer to this walk thru link:https://www.2carpros.com/articles/engine-hesitates

Was this

answer

helpful?

Yes

No

Sunday, May 20th, 2012 AT 1:46 AM

2000 TAHOE ONE

MEMBER
25 POSTS

Do you mean with vacuum advance unpluged also is it true I should be 36 degrees btdc

SPONSORED LINKS

Was this

answer

helpful?

Yes

No

Sunday, May 20th, 2012 AT 3:19 AM

RASMATAZ

MECHANIC
75,992 POSTS

You need a timing degree wheel to set the ignition timing correctly due to the camshaft you're using-

Was this

answer

helpful?

Yes

No

Sunday, May 20th, 2012 AT 3:25 AM

2000 TAHOE ONE

MEMBER
25 POSTS

Does that require me to pull motor back apart

Was this

answer

helpful?

Yes

No

Sunday, May 20th, 2012 AT 3:35 AM

CJ MEDEVAC

MECHANIC
11,005 POSTS

NEG--ON THE PULL APART

YOUR ORIGINAL OEM TIMING PROBABLY AIN'T GONNA CUT IT WITH THAT CAM----DID THE "CAM" RECOMMEND THE TIMING SETTING?

IF SO, USE THE NORMAL PROCEDURE, BUT SET IT TO THAT--IF IT'S OFF OF THE SCALE, YOU MAY HAVE TO MAKE YOUR SCALE "BIGGER"

THE MEDIC