upgrading

1976 MG 18
800 MILES • 4 CYL • 2WD • MANUAL
Avatar
SPANISH PANTHER
  • MEMBER
  • 2 POSTS
I have a 1976 MG Miget with a 1500 engine with a zenith-stromberg carb which i am upgrading now with a dvg webber down-draft carb plus a high performance pace setter header and a monza exhaust system and in the further planning to install a kent performance camshaft street kit that comes with lifter and value springs plus planning installing a oil cooler and a aluminum flywheel plus a electrical fan .my question is im not planning to race the car but just want to upgrade the performance Im i going the right path or will i create a monster?
Nov 22, 2010 at 1:58 AM
Advertisement
Avatar
HMAC300
  • CERTIFIED EXPERT
  • 48,601 POSTS
no I had a 78 MGB and did all that to it with the exception of th ealuminum flywheel and it was a good driver. You may need new valve springs caps though if you go to double springs. you may notice a difference on takeoff with the aluminum flywheel however due to it being lighter .
Nov 22, 2010 at 2:15 AM
Avatar
SPANISH PANTHER
  • MEMBER
  • 2 POSTS
Hi hmac300 !Awesome Thanks for the advice! Will take your advice thanks again!!!
Nov 22, 2010 at 12:55 PM
Advertisement