Transmission will not shift to move car?

140,000 MILES
Avatar
CLIFFORDAHILLJR4
  • MEMBER
  • 4 POSTS
car starts, Gear lever will move but car will not go into reverse or drive. I think it may have something to do with my throttle body cable I am thinking something came unpluged
Oct 9, 2011 at 4:18 PM
Advertisement
Avatar
HMAC300
  • ✓Experienced Mechanic
  • 48,601 POSTS
check your fluid first. even if the throttle cable is unplugged or disconneced it should still go forward and back. if it doesn't then you could have a clutch/seal problem
Oct 9, 2011 at 4:35 PM
Avatar
CLIFFORDAHILLJR4
  • MEMBER
  • 4 POSTS
fluid is full and clean. Would my vacume hoses have something to do with it?
Oct 9, 2011 at 4:37 PM
Avatar
HMAC300
  • ✓Experienced Mechanic
  • 48,601 POSTS
if it's a 350 yes but they also put 200 thm in them the 200 has avery small pan. the 350 shold have a vacuum modulator on the right hand side with the line going to it. but it should still go into reverse andforward sounds like you need to go to trans shop
Oct 9, 2011 at 4:40 PM
Avatar
CLIFFORDAHILLJR4
  • MEMBER
  • 4 POSTS
yes its a 350T, it has the vaccuum modulator on the right with a hose connecting to my intake manifold. What about a box on the drivers side of the engine compartment above the wheel well that says hold/enguage?
Oct 9, 2011 at 4:59 PM
Avatar
HMAC300
  • ✓Experienced Mechanic
  • 48,601 POSTS
i can't remember that far baack on what that does. you'll have to try it. I can't ever remember seeing one.
Oct 9, 2011 at 5:01 PM
Avatar
CLIFFORDAHILLJR4
  • MEMBER
  • 4 POSTS
ok thanks for your help
Oct 9, 2011 at 5:10 PM
Add a reply
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.

Frequently Asked Problems for This Vehicle