Cranks, but no start

2004 ISUZU RODEO

180,128 MILES • 3.5L • V6 • 2WD • AUTOMATIC

DONNIE25

MEMBER
1 POST

Stalled on highway.
Checked for codes.
P0337
Replaced crank sensor.
Same symptoms. Crank but no start.
Same code comes back up.
Checked harness. No breakage or wear. Just oily at mid section.

I attached test light diags. At the connector for the crank sensor. With key turned at ignition point.
Also freeze frames from the scanner.

Images (Click to enlarge)

Jan 7, 2019 at 11:15 AM

STRAILER

✓ASE Certified Mechanic
54,837 POSTS

When you turn the key on without cranking the engine over can you hear the fuel pump run in the tank for five seconds? Does the ignition have spark? Will it run on starting fluid? Here is a guide to help us get started:

https://www.2carpros.com/articles/car-cranks-but-wont-start

We should check the wiring between the crank sensor and the PCM. here is a guide to help you and the engine wiring diagrams so you can see how the sensor is wired:

https://www.2carpros.com/articles/how-to-check-wiring

Check out the diagrams (below). Please let us know what happens.

Images (Click to enlarge)

Professional Diagram for 2CarPros Members
Click here to log in and view diagram.

Jan 9, 2019 at 10:22 AM