Chevrolet Cruze Ignition
Browse Chevrolet Cruze Ignition questions and answers. Choose a question that matches your symptoms.
7 discussions
Cylinder Number Two Misfire
Hi There. My Car Is Jerking When Idling. Checked Using Obd It Indicated A Misfire In Cylinder Number 2. Checked The Plugs And Found Oil In...
Asked by Mancitshana BM
Fire Not Going To Coil Pack?
Hey, I Recently Replaced My Ecm X2 Harness Due To A Failure With The Oil Pressure Pan. After Getting The Wiring And Pins Back Correct...
Asked by CoreyAbram901
Possible Timing Issue
I Asked About This Same Car A Few Months Back. Had To Replace Head Gasket In It And Afterwords Had Trouble Getting The Exciter Rings...
Asked by Dane Despaw Sr.
No Spark From The Ignitor Pack, Schematics Needed
Hi, The Above Car Doesn't Have Any Spark From The Ignitor Pack. The Pack Is A New Ngk 4-cylinder Coil Over Pack. I Want To Check On...
Asked by Spyder918
What Are The Torque Specs For Spark Plugs And Turbo...
Hello. (the Car Listed Above Has A Turbo)
1. I Have A Leak At The Turbo Oil Line, Part#25198546v, That I Would Like To Replace But Don...
Asked by jalfano24
Ignition Melted
Would A Broken Boot Cause The Ignition Coil To Get Hot And Start To Melt?
Asked by Kahnefn
Engine Misfire On Cylinder Three, Engine Shaking?
1. I Tried A Cylinder Compression Test On Cylinder 1
Cylinder 2
Cylinder 4 All Are Reading Fine.
I Am Unable To Use My Compression Tool...
Asked by P tone
Browse other repair topics
Can’t find your issue?
Ask a new Chevrolet Cruze question
