What is the procedure for testing the maf?

2004 FORD EXPEDITION
125,000 MILES • 5.4L • V8 • 2WD • AUTOMATIC
Avatar
RDRAINER
  • MEMBER
  • 2 POSTS
Code P0171 and P0174. I cleaned the maf with proper cleaner also changed air and fuel filter. Would like to like to test the MAF to verify it is working properly but need procedure to do so. Thank you for any help or info.
Feb 23, 2014 at 4:50 AM
Advertisement
Avatar
SATURNTECH9
  • ✓ASE Certified Mechanic
  • 30,869 POSTS
  • ASE Certified Mechanic
I would be looking for a vacuum leak the number one thing I have seen cause those codes on the fords are vacuum leaks. I would check actual fuel pressure and for vacuum leaks if you reset the codes how quickly will the code reset?
Feb 23, 2014 at 7:22 AM
Avatar
RDRAINER
  • MEMBER
  • 2 POSTS
Thank you!!!! I took plastic cover off of intake and found not 1 but 2 vacuum leaks near the back of the intake.This should fix the problem and thank you for the info.
Feb 23, 2014 at 4:02 PM
Avatar
SATURNTECH9
  • ✓ASE Certified Mechanic
  • 30,869 POSTS
  • ASE Certified Mechanic
Your welcome also check the pcv hose and grommets for leaks also pretty common.Your welcome glad I could help.
Feb 23, 2014 at 6:42 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.