SPONSORED LINKS

Still scrubbing when I turn right even after the rebuild

Tiny
REICHER82
  • MEMBER
  • 1992 TOYOTA PASEO
  • 1.5L
  • 4 CYL
  • 4WD
  • AUTOMATIC
  • 150,000 MILES
Okay, I have a 1992 Toyota paseo just got done replacing the front driver side hub assembly including brand new rotor, brake pads, wheel bearing, a new hub, a new caliper and also new CV joint it seem to be running very well but when I make a right turn you can hear a faint grinding, what could I have missed all help is definitely appreciated
SPONSORED LINKS
Monday, February 29th, 2016 AT 7:29 PM

4 Replies

Tiny
REICHER82
  • MEMBER
  • 3 POSTS
Seems to be running very smoothly and only after about 10 miles did it fail and start scrubbing when I turn right just thought I'd add that, Thanks
Was this
answer
helpful?
Yes
No
Monday, February 29th, 2016 AT 7:41 PM
Tiny
MHPAUTOS
  • MECHANIC
  • 31,937 POSTS
Fitting wheel bearings to these front wheel drive cars can be tricky, if you pushed on the inner race and not the outer race to install you may have damaged the bearing, how did you press it in?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Tuesday, March 1st, 2016 AT 3:29 AM
Tiny
REICHER82
  • MEMBER
  • 3 POSTS
I did it with a 24 ton machine press
Was this
answer
helpful?
Yes
No
Tuesday, March 1st, 2016 AT 5:20 AM
Tiny
KEN L
  • MASTER CERTIFIED MECHANIC
  • 47,536 POSTS
If I can but in here, have you checked the rotor dust shield it could be touching the rotor when you turn, please check it and get back to us
Was this
answer
helpful?
Yes
No
Thursday, March 3rd, 2016 AT 9:28 AM

Please login or register to post a reply.

Related CV Axle Replace/Remove Content

CV Axle Replacement
GUIDE
CV Axle Replacement
All front wheel drive and independent rear suspension cars utilize a CV axle to deliver power from the engine to the wheels. These CV axles have a six balls inside a CV...

Sponsored links