Rotor

Tiny
ZIGGIEDOWN
  • MEMBER
  • 1984 PORSCHE 944
  • 2.5L
  • 4 CYL
  • 2WD
  • MANUAL
  • 90,000 MILES
Hexadecimal screw holding rotor is stripped. How can I remove this screw?
Thursday, August 10th, 2017 AT 10:08 AM

1 Reply

Tiny
STEVE W.
  • MECHANIC
  • 13,560 POSTS
The 1984 has through bolts that hold the rotor on correct?
I know some went through as a bolt/nut while others screwed into a threaded hole in the hub.
If these are the through bolted ones you can use a chisel to break the nut off the bolt. Or you can use a torch and heat the nut to red hot and it should come off.
Another option is to buy a twelve point socket that you can drive onto the nut/bolt head after heating it and use that to remove it.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Thursday, August 10th, 2017 AT 10:23 AM

Please login or register to post a reply.

Sponsored links