SPONSORED LINKS

Limp mode

Tiny
SHERLTON
  • MEMBER
  • 2014 MINI COOPER
  • 1.4L
  • 4 CYL
  • 2WD
  • MANUAL
  • 150,000 MILES
I just changed my clutch plate on my car but after returning everything back, the car won't accelerate or idle. But when I pour petrol on its throttle it idles but still would not idle.

When I start it, it only idles for two seconds and shuts off.
SPONSORED LINKS
Wednesday, July 24th, 2019 AT 3:26 AM

3 Replies

Tiny
KEN L
  • MASTER CERTIFIED MECHANIC
  • 48,380 POSTS
Hello,

It sounds like you lost the programming did you disconnect the battery when you did the job? Lets run the codes to see what comes up. here is a guide:

https://www.2carpros.com/articles/checking-a-service-engine-soon-or-check-engine-light-on-or-flashing

Please run down this guide and report back.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
+1
Friday, July 26th, 2019 AT 10:32 AM
Tiny
SHERLTON
  • MEMBER
  • 2 POSTS
No, I did not remove it or its terminals.
Was this
answer
helpful?
Yes
No
Wednesday, July 31st, 2019 AT 2:51 AM
Tiny
KEN L
  • MASTER CERTIFIED MECHANIC
  • 48,380 POSTS
Okay, lets run the codes to see what come up. Also can you recheck the grounds around the transmission please? Can you please shoot a quick video with your phone so we can see what's going on? That would be great. You can upload it here with your response.
Was this
answer
helpful?
Yes
No
Wednesday, July 31st, 2019 AT 11:53 AM

Please login or register to post a reply.

Related Engine Computer Limp Mode - Reduced Power Content

Reduced Power - Limp Mode
GUIDE
Reduced Power - Limp Mode
The computer system that controls your car has a built in safety feature called "Reduced Power" or "Limp Mode" which is designed to get the car where it is...

Sponsored links