2001 Mitsubishi Eclipse

SANDRAL

MEMBER
2001 MITSUBISHI ECLIPSE

Interior problem
2001 Mitsubishi Eclipse 6 cyl Two Wheel Drive Automatic

We unhooked the battery cables and the stereo flashed code across the screen my daughter punched in some #'s she obviously didnt know what she was doing. It has locked itself and will not let us in. What do I do to fix it?

3 Replies

MHPAUTOS

MECHANIC
31,937 POSTS

Hi there,

some of these radio have a theft deterrent system that will require you to have the radio re coded by the manufacturer, other will require the radio to sit for a few hours before the code can be re entered, I would check with the dealer first and make sure that you have the correct code as well.

Mark(mhpautos)

SPONSORED LINKS

Was this

answer

helpful?

Yes

No

Thursday, August 28th, 2008 AT 9:57 PM

MRMIKIE

MEMBER
4 POSTS

If you disconnect the battery and let it sit for a few hrs, the radio will reset itself. However you will need the 4 digit code that most Mitsu Dealerships will provide to you at no charge (most, not all).

Was this

answer

helpful?

Yes

No

Wednesday, September 3rd, 2008 AT 2:06 PM

TBALTZ

MEMBER
1 POST

If the display is asking for the code, the 4 digit code must be input as described in your owners manual.

If you do not have the 4 digit code, you will need the serial number of the radio, and supply this to your Mits dealership, who will give you the code. To find the radio serial number, you must remove the panel surrounding it (2 screws at the bottom). The serial will be on a sticker attached to the top left of the radio.

If you tried a wrong code several times, the display will read OFF. To reset, turn key in ignition to ACC for about an hour, then it should go back to asking for the code. Keep a window open in case the car auto locks itself.

Was this

answer

helpful?

Yes

No

Tuesday, March 10th, 2009 AT 3:55 PM