WIPER MOTOR Removal & Installation 1. Disconnect battery ground cable. Remove rear hood seal. Remove wiper arms. Remove cowl vent screens. Unplug harness connector from motor. Remove wiper motor. 2. Unsnap and remove wiper linkage cover. Lift locking tab, and pull clip away from shaft to disengage linkage from operating arm on motor. Remove motor. To install, reverse removal procedure. CAUTION: Wiper motor contains ceramic magnets that may crack or shatter if motor is dropped or handled roughly. Page 1 of 1 3/13/2010 .
SPONSORED LINKS
Saturday, March 13th, 2010 AT 10:48 AM