1999 Ford Windstar P1131 code

Tiny
NEOLITIC
  • MEMBER
  • 1999 FORD WINDSTAR
Computer problem
1999 Ford Windstar 6 cyl Front Wheel Drive Automatic 75k+ miles 3.8L V6

Is this amass air sensor code?
I can't find a photo that looks like my car's set up.
Is the MAF the part between the throttle body and
the intake manifold?
What do I use to clean it, throttle body cleaner,
contact cleaner, or must it be the CRC MAF cleaner?
Friday, October 31st, 2008 AT 1:52 PM

3 Replies

Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
DTC P1131 indicates the system is correcting RICH for an overly LEAN condition. The Heated Oxygen Sensor (HO2S) voltage is less than 0.45 volts. This is usually due to a vacuum leak after the MAF. It can also be caused by a bad PCV valve or PCV system hose
Was this
answer
helpful?
Yes
No
Friday, October 31st, 2008 AT 4:17 PM
Tiny
NEOLITIC
  • MEMBER
  • 2 POSTS
Thanks, guy at the parts store told me that the 1131 code was air mass, and P0135 was #1 bank O2 sensor.
Was this
answer
helpful?
Yes
No
Friday, October 31st, 2008 AT 6:38 PM
Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
Clean the MAF with a spray tuner cleaner, #64-4315 available at radioshack
Was this
answer
helpful?
Yes
No
Saturday, November 1st, 2008 AT 2:14 PM

Please login or register to post a reply.

Sponsored links