New fuel filter and pump, still won't start

Tiny
P_LYNN68
  • MEMBER
  • FORD MUSTANG
My 2000 mustang has about 120,000 miles on it. 3.8L engine. Wasn't driven a lot for about two months, but no problems when it was. After being driven for 2 days, car would not start. Added water remover to gas tank. Changed fuel filter, fuel pump and plugs. Checked relay. Car still won't start. Any advice?
Saturday, October 27th, 2007 AT 4:12 PM

6 Replies

Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
Disconnect a sparkplug wire and ground it to the engine while cranking it over-do you have spark and injector pulse?
Was this
answer
helpful?
Yes
No
+3
Saturday, October 27th, 2007 AT 4:25 PM
Tiny
P_LYNN68
  • MEMBER
  • 6 POSTS
Yes
Was this
answer
helpful?
Yes
No
+1
Saturday, October 27th, 2007 AT 4:29 PM
Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
When you turn key to On -do you hear the fuel pump?
Was this
answer
helpful?
Yes
No
+1
Saturday, October 27th, 2007 AT 4:56 PM
Tiny
P_LYNN68
  • MEMBER
  • 6 POSTS
Yes you can hear it
Was this
answer
helpful?
Yes
No
+1
Saturday, October 27th, 2007 AT 5:08 PM
Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
Next step you need to check the actual fuel pressure by using a fuel pressure gauge calibrated for your system and report back them readings before we continue to the next phase. We got 5 phases to go.
Was this
answer
helpful?
Yes
No
+1
Saturday, October 27th, 2007 AT 6:54 PM
Tiny
P_LYNN68
  • MEMBER
  • 6 POSTS
Ok. Will have to do that tomorrow and get back to you. Dark here now and do not have the gauge. Will let you know as soon as we get it. Thanks!
Was this
answer
helpful?
Yes
No
Saturday, October 27th, 2007 AT 7:06 PM

Please login or register to post a reply.

Sponsored links