Clutch pedal reattachment to the pedal assembly

Tiny
BOB%
  • MEMBER
  • 1970 PORSCHE 911
  • 6 CYL
  • 2WD
  • MANUAL
  • 140,000 MILES
When I got my car the clutch return spring on the pedal assembly was broken. Therefore, after I put new bronze bushings into the assembly, I have no idea how much pressure has to be put on the clutch return spring when I re-attach the clutch pedal to the rod and put the pin through it. Should the pin be put into the rod vertically, or horizontally?There has to be enough spring pressure from the spring to draw back the cable. Please let me know what to do. Thank you Robert Mason.
Thursday, August 20th, 2020 AT 11:54 AM

7 Replies

Tiny
4DRTOM
  • MECHANIC
  • 467 POSTS
Hello,

You only need enough to pull the pedal back to position as long as its tight. The more tension the quicker the return. Is this bushing not a Porsche part?
Tom
Was this
answer
helpful?
Yes
No
Thursday, August 20th, 2020 AT 10:49 PM
Tiny
BOB%
  • MEMBER
  • 67 POSTS
I replaced the nylon bushing with a bronze bushing (a Porsche part). My question is, how much tension should be put on the return spring(it's attached to the same rod that the clutch pedal attaches to)in order for me to attach the pedal back on the rod and put the pin in to hold the pedal on the rod?Does the pin go in vertical, or horizontal?
Was this
answer
helpful?
Yes
No
Friday, August 21st, 2020 AT 6:39 AM
Tiny
KEN L
  • MASTER CERTIFIED MECHANIC
  • 47,642 POSTS
Can you please shoot a quick video with your phone so we can see what's going on? That would be great. You can upload it here with your response.
Was this
answer
helpful?
Yes
No
Friday, August 21st, 2020 AT 11:41 AM
Tiny
BOB%
  • MEMBER
  • 67 POSTS
Ken, I'm trying something and I'll let you know if it works. P.S. I don't know how to download videos etc. Take care, BOB.
Was this
answer
helpful?
Yes
No
Friday, August 21st, 2020 AT 2:30 PM
Tiny
4DRTOM
  • MECHANIC
  • 467 POSTS
Hello Bob,

If you use your phone to take a video, when it's open and your looking at the recording of it there should be a place to share it. You could share it to your email then get the email on your regular computer and save it from there to the desktop. Then when your on 2CarPros and you click upload an image open the file from your desktop.
Tom
Was this
answer
helpful?
Yes
No
+1
Friday, August 21st, 2020 AT 8:01 PM
Tiny
BOB%
  • MEMBER
  • 67 POSTS
Tom,

I'll try that if my attempt fails.I'll let you know if my solution works. Either way, thank you for your help, BOB.
Was this
answer
helpful?
Yes
No
Friday, August 21st, 2020 AT 9:11 PM
Tiny
4DRTOM
  • MECHANIC
  • 467 POSTS
Hi Bob,
Sounds good, I will keep my eye out for you.
Tom
Was this
answer
helpful?
Yes
No
Saturday, August 22nd, 2020 AT 8:17 AM

Please login or register to post a reply.

Sponsored links