2014 Chevrolet Traverse Electronic

Tiny
JLR61960
  • MEMBER
  • 2014 CHEVROLET TRAVERSE
  • 3.6L
  • 6 CYL
  • AWD
  • AUTOMATIC
  • 244 MILES
Picked up car at chevy dealer after having factory remote start installed. On drive home cruise did not work. Then ABS light and service traction control light came on. Also, time and date on clock wrong. Then when going up a grade engine miss fired all the way up then would stop when top of grade reached. Called dealer had car rollback take to dealer. Dealer said nothing shows on computer code. Now it's working okay so the dealer says. Haven't picked it up yet. Any ideas?
Sunday, January 5th, 2014 AT 8:37 PM

3 Replies

Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,885 POSTS
If the check engine light was on, there should have been codes stored. Is everything working properly now?
Was this
answer
helpful?
Yes
No
Monday, January 6th, 2014 AT 6:55 AM
Tiny
JLR61960
  • MEMBER
  • 2 POSTS
Yes. Dealer said all is good now. Engine light never came on. Just ABS and service electronic traction control. As I said before also miss fired going up hills.
Was this
answer
helpful?
Yes
No
Monday, January 6th, 2014 AT 7:15 AM
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,885 POSTS
To be honest, it is hard to say what caused the lights to come on. If the engine had a misfire, that should have set the check engine light too. Since the lights are out now, the only thing you can really do is drive it to see if the problem comes back.
Was this
answer
helpful?
Yes
No
Monday, January 6th, 2014 AT 7:37 AM

Please login or register to post a reply.

Sponsored links