tire warning light will not reset.

2008 LEXUS ES 350
8,200 MILES
Avatar
SUPERTIE2
  • MEMBER
  • 1 POST
The warning light blinks for 1 minute but stays lit and doesn't reset. I followed the manual but no luck. The tire pressure is equal in all the tires including the full size spare at 30 psi. The closest dealer is 130 miles.
Nov 23, 2011 at 4:25 AM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.
Advertisement
Avatar
JACOBANDNICKOLAS
  • CAR REPAIR CONTRIBUTOR
  • 110,190 POSTS
Hello,

Here is how to reset the tire monitors.

(a) Check for DTCs.
(1) Turn the engine switch off.
(2) Using SST, connect terminals TC and CG of the DLC3.
SST: 09843-18040
(3) Turn the engine switch on (IG).
(4) Read and record any DTCs from the tire pressure warning light on the combination meter. Refer to the illustration for examples of a normal system code and codes 13 and 33.
HINT :
If the tire pressure warning light does not indicate any DTCs or the normal system code, inspect the tire pressure warning light circuit or TC and CG terminal circuit.

Let me know if you need anything else. Cheers,
Image (Click to enlarge)
Attached Media
Nov 23, 2011 at 4:29 AM
Advertisement
Avatar
YCP555
  • MEMBER
  • 0 POST
Thanks just what I needed.
Jul 8, 2018 at 10:20 AM