2008 Honda City Engine knocking Problem

Tiny
FAISALIQBAL87
  • MEMBER
  • 2008 HONDA CITY
  • 1.3L
  • 4 CYL
  • 2WD
  • MANUAL
  • 120,000 MILES
Hi,
i have Honda city 2008 with I.D.S.I engine. I am facing a knocking at the r.P.M of 13.K to 2.2k as well as up on the climbs the engine knocks. I have changed its knock sensors, 8 nos of plugs, air cleaner, transmission oil, also changes its engine rings clutch & pressure plate but in vain. The problem still exist. Please guide.
Wednesday, September 2nd, 2015 AT 12:58 AM

1 Reply

Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,755 POSTS
Hi,

In most cases, a knock is related to a failed bearing. In the engine, there are many different bearings such as crankshaft main bearings and thrust bearings, connecting rod bearings, camshaft bearings, and so on.

Is the engine's oil pressure in the acceptable range? Also, have you checked things like engine compression to confirm there isn't internal damage?

Do me a favor. Take a look through this link. It describes different engine sounds which you may find helpful.

https://www.2carpros.com/articles/engine-noises

Also, if you haven't, check engine compression to confirm it is somewhat even in all cylinders. Here is a link showing how it's done:

https://www.2carpros.com/articles/how-to-test-engine-compression

I hope this helps. Let me know if you have other questions.

Take care,

Joe
Was this
answer
helpful?
Yes
No
Monday, July 19th, 2021 AT 9:59 PM

Please login or register to post a reply.

Sponsored links