SPONSORED LINKS

2007 Vauxhall Vectra clutch problem

Tiny
SID03BLUE
  • MEMBER
  • 2007 VAUXHALL VECTRA
  • 1.8L
  • 4 CYL
  • 2WD
  • MANUAL
  • 10,000 MILES
Hi there.
i have a vauxhall vectra and I put in a second hand gearbox and put in new clutch kit, csc slave cylinder, master cylinder and all clutch pipes, I have bleed the system and have no air in system. But when I start the car I cant get in gear, but with car not running it goes in gear ok.I can then start car while in gear and when I lift up clutch it drives.
SPONSORED LINKS
Sunday, April 26th, 2015 AT 10:40 AM

1 Reply

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
We have no info on this car as it is not in US. But this has to be similar to our cobalt. Pic show proper bleed procedure which means you need a vacuum pump and manual bleeding is NOT SUPPORTED so follow the directions I"m sending in pics.
Images (Click to make bigger)
Thumb
Thumb
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Sunday, April 26th, 2015 AT 3:42 PM

Please login or register to post a reply.

Related Transmission Clutch Slave Cylinder Content

Throwout Bearing - Secondary Cylinder Replacement
GUIDE
Throwout Bearing - Secondary Cylinder Replacement
A throwout bearing/secondary cylinder is used to apply force against the clutch pressure plate to release the clutch disc and should be replaced as part of the normal clutch...
VIEW MORE

Sponsored links