SPONSORED LINKS

Wheel Speed Sensor

Tiny
WEEICEMON1
  • MEMBER
  • 2007 KIA SORENTO
  • 3.8L
  • 6 CYL
  • RWD
  • AUTOMATIC
  • 171,000 MILES
Can you tell me what the procedure to remove the rear left wheel speed sensor? I can see is mounted to the rear axle at the hub and I have removed the single bolt holding it in but is does not freely come out. Is it under pressure? Also I followed the wiring up and it looks like it goes into the wheel well. Thank You for any help you might have.
SPONSORED LINKS
Saturday, August 1st, 2015 AT 7:52 AM

3 Replies

Tiny
CARADIODOC
  • MECHANIC
  • 33,871 POSTS
It sounds like you did everything you need to remove it but it's rusted in. If it's defective, you might be able to drill through it, then remove it in pieces.
Was this
answer
helpful?
Yes
No
Tuesday, April 20th, 2021 AT 11:29 AM
Tiny
WEEICEMON1
  • MEMBER
  • 2 POSTS
The funny thing is that it will turn but I cannot pull it out. Kind of like its locked in place.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Tuesday, April 20th, 2021 AT 11:29 AM
Tiny
CARADIODOC
  • MECHANIC
  • 33,871 POSTS
Probably a ring of rust on the end of it. If you're sure it's bad, drill through it, then pull the pieces out.

Also, there's a rubber o-ring right under the mounting ear. Try prying up gently with a screwdriver while you rotate the sensor. Spray it lightly with a lubricant to help free it up
Was this
answer
helpful?
Yes
No
+1
Tuesday, April 20th, 2021 AT 11:29 AM

Please login or register to post a reply.

Related ABS Wheel Speed Sensor Replace/Remove Content

How to Replace ABS Wheel Speed Sensor Video
VIDEO
How to Replace ABS Wheel Speed Sensor Video
Instructional repair video
ABS Traction Control Wheel Speed Sensor Replacement
GUIDE
ABS Traction Control Wheel Speed Sensor Replacement
A wheel speed sensor is designed to provide feedback information to the traction control and ABS computer to help monitor tire rotational speed. This guide will help walk...

Sponsored links