SPONSORED LINKS

2006 Hyundai Terracan Clutch

Tiny
DALE WILTON
  • MEMBER
  • 2006 HYUNDAI TERRACAN
  • 2.9L
  • 4 CYL
  • TURBO
  • 4WD
  • MANUAL
  • 195,000 MILES
On starting there is a noise from under car and when I let clutch out there is a grinding sort of feeling in the pedal but when up to speed it goes as well as ever could this problem be the throw out bearing and if so how much would it cost to fix I live in qld australia
SPONSORED LINKS
Friday, January 24th, 2014 AT 8:44 PM

2 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
It cold be throwout bearing which normally means another clutch. Cold be a trans bearing as well though. Have no idea on costs as we are in u.S.
Was this
answer
helpful?
Yes
No
Saturday, January 25th, 2014 AT 8:23 AM
Tiny
KNOWLEDGE IS POWER
  • MECHANIC
  • 1,136 POSTS
That car probably has a dual mass flywheel as well. They are generally pretty pricey. In order to tell you'd have to take out the starter and or pull back the transmission. Id drive it a while longer being mindful of the noise and vibration as it gets worse.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, January 25th, 2014 AT 7:13 PM

Please login or register to post a reply.

Related Transmission Clutch Throw Out Bearing Content

Throwout Bearing - Secondary Cylinder Replacement
GUIDE
Throwout Bearing - Secondary Cylinder Replacement
A throwout bearing/secondary cylinder is used to apply force against the clutch pressure plate to release the clutch disc and should be replaced as part of the normal clutch...

Sponsored links