SPONSORED LINKS

Driveability

Tiny
DECAPTAIN2010
  • MEMBER
  • 2006 FORD E-SERIES VAN
  • V8
  • AWD
  • AUTOMATIC
  • 195,000 MILES
My ford E150 2006 model can start but can only idle but cannot acelerate codes are P2104 P2110 P2101 Po222 Po708. What will I do
Saturday, December 11th, 2010 AT 6:45 PM

2 Replies

Tiny
BMRFIXIT
  • MECHANIC
  • 19,053 POSTS
P0708 Digital TRDigital TR sensor circuit TR3A openDigital TR sensor circuit TR3A reading 2.6 V- 5.0 V (open circuit). This DTC cannot be set by an incorrectly adjusted digital TR sensor. Increase in EPC pressure. Defaults to (D) or D for all gear ranges
Images (Click to make bigger)
Thumb
Thumb
Thumb
Thumb
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Tuesday, December 14th, 2010 AT 11:31 PM
Tiny
DECAPTAIN2010
  • MEMBER
  • 75 POSTS
Thank BMRFIXIT let me inform you that when the throttle body was removed and tested manually, the motor is rolling or working and the throttle plate is rotating. Now, I dont understand your technicalities but I want to know where the problem lies bcos it has been like this for over 8 months.I dont know the increase in EPC pressure you mentioned. Again if engine is idling at Park position it can't even accelerate but will have unstable idling and wen you engage the automatic gear to drive, it will move on that same speed. Thanks again for your concern
Was this
answer
helpful?
Yes
No
Friday, December 17th, 2010 AT 1:51 PM

Please login or register to post a reply.

Sponsored links