Codes of PO171 and PO174 bank 1 and 2 both with lean fuel

Tiny
MIKE CHOUINARD
  • MEMBER
  • 2005 DODGE DAKOTA
  • 100,500 MILES
I have a Dodge Dakota that is not always getting the right gas amount it is giving me scan codes of po171 and po174 bank 1 and 2 both with lean fuel what would cause this to happen I have changed the egr and still reading and running lean

truck runs fine then its like it dont get the gas to always keep going and will stall some times
Monday, April 2nd, 2012 AT 9:09 PM

4 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Check your fuel pressure first shold be 58psi +-2
Was this
answer
helpful?
Yes
No
Monday, April 2nd, 2012 AT 10:34 PM
Tiny
MIKE CHOUINARD
  • MEMBER
  • 3 POSTS
Gas presure ok so its something else.
Was this
answer
helpful?
Yes
No
Tuesday, April 3rd, 2012 AT 9:14 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Here are possible causes along with a vacuum leak.
Was this
answer
helpful?
Yes
No
+1
Tuesday, April 3rd, 2012 AT 10:43 PM
Tiny
DJCL
  • MECHANIC
  • 767 POSTS
DO YOU HAVE SCANNER FREZE FRAME DATA ON THAT CODE. DID IT SET @ HI SPEED OR IDLE HOT OR COLD
Was this
answer
helpful?
Yes
No
Tuesday, April 3rd, 2012 AT 11:23 PM

Please login or register to post a reply.

Sponsored links