2004 Hyundai Getz Hi 1600 Which Just Had Cam Belt Replaced Plus Two Bent Valves

2004 HYUNDAI GETZ
160,000 MILES
Avatar
ANONYMOUS
  • MEMBER
  • 1 POST
HI I have a 1600 getz which has just had the cam belt replaced plus two bent valves, and now when you rev the engine the revs drop to a point that it sometimes cuts out also when driving i brake while the clutch is in and it also cuts out? i have removed the idle control valve and cleaned and lubricated it, but still no better, please could you help!!


Many thanks
Gareth
Oct 30, 2012 at 11:30 AM
Advertisement
Avatar
FIXITMR
  • ✓ASE Certified Mechanic
  • 9,990 POSTS
  • ASE Certified Mechanic
if you had the work done at a shop i would go back and explain the problem and the fact that it did not do this previously to their repairs.
Oct 30, 2012 at 12:07 PM
Avatar
KHLOW2008
  • ✓ASE Certified Mechanic
  • 41,814 POSTS
  • ASE Certified Mechanic
If valve lash is not hydraulic, check the valve clearance. Might need adjustment.
Oct 30, 2012 at 1:24 PM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.