SPONSORED LINKS

2004 Chrysler Crossfire manual transmission

Tiny
MATTVPAYNE
  • MEMBER
  • 2004 CHRYSLER CROSSFIRE
  • 115,000 MILES
I have an 04 crossfire, been driving great and have had no problems. Went to drive it yesterday and now I only have 3rd and 4th gear. I can cycle the transmission through all 6 gears including reverse but only 3rd and 4th activate. Is this a problem with the PCM? If so can I just simply reset it?
SPONSORED LINKS
Thursday, October 31st, 2013 AT 6:23 AM

4 Replies

Tiny
WRENCHTECH
  • MECHANIC
  • 20,761 POSTS
This is an electronically controlled transmission that also has a TCM. It needs to be troubleshooted by a professional using a scan tool capable of accessing the trans module. From there he can activate the various solenoids and determine what is working and what is not.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Thursday, October 31st, 2013 AT 6:48 AM
Tiny
WRENCHTECH
  • MECHANIC
  • 20,761 POSTS
You know, I just noticed your title and previously though you had an auto trans. Does the gear shift feel normal through the other gears.
Was this
answer
helpful?
Yes
No
Thursday, October 31st, 2013 AT 6:57 AM
Tiny
MATTVPAYNE
  • MEMBER
  • 2 POSTS
Thank you for your response. Yes it does feel normal, sounds normal too. I can roll through every gear including reverse (reverse light on the bumper does not come on). Every shift is smooth and sounds perfectly fine until I turn it on, then no matter what gear I'm actually in it engages 3rd or 4th.
Was this
answer
helpful?
Yes
No
Thursday, October 31st, 2013 AT 7:05 AM
Tiny
WRENCHTECH
  • MECHANIC
  • 20,761 POSTS
That sounds like something is broken inside the transmission and it will have to come out and apart.
Was this
answer
helpful?
Yes
No
Thursday, October 31st, 2013 AT 7:15 AM

Please login or register to post a reply.

Related Transmission Reverse Content

Sponsored links