SPONSORED LINKS

Car idling is not smooth?

Tiny
PLACIDVJ
  • MEMBER
  • 2003 SUZUKI WAGON
  • 12 MILES
When my car is stopped on red light with a normal temperature, at normal rpm, idling is shaking or u can say I feels some vibration on handle. This problem occurs on petrol as well cng.
i change its rpm motor, engine wiring, plugs, coil n coils wire, wash its throttle body, set its tappet, change its pcv valve, and one sensor that I don't know the name of that sensor.I think its located on throttle body for (butterfly motion). But doing such things, problem remain same for feeling vibration on handle, I want smooth idling, without vibration.
plzzz tell me the exact solution or points that I can do for this problem.
thanks.
SPONSORED LINKS
Sunday, December 4th, 2011 AT 5:48 PM

3 Replies

Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,867 POSTS
Check for vacuum leaks and check idle air control valve.
Was this
answer
helpful?
Yes
No
Sunday, December 4th, 2011 AT 6:33 PM
Tiny
PLACIDVJ
  • MEMBER
  • 2 POSTS
Thanks for your reply sir,
but can u plz tell me where are these locations that the vacuum leaks.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Monday, December 5th, 2011 AT 4:49 PM
Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,867 POSTS
There are several vacuum hoses on the engine. You need to inspect them for damage. The IAC is on the throttle body. It is an electric solenoid that is designed to maintain the vehicle's idle.
Was this
answer
helpful?
Yes
No
Monday, December 5th, 2011 AT 6:49 PM

Please login or register to post a reply.

Related Engine Stall At Idle Content

Engine Stalls After Dead or New Battery
GUIDE
Engine Stalls After Dead or New Battery
So you installed a new battery and now the engine stalls? You have done nothing wrong because believe it or not this is normal. The engine computer has a learning cycle...

Sponsored links