Is it possible to adjust the clutch

There is no way to adjust the clutch because it is self adjusting. But if you are having problem this video will show you how to bleed and or replace the slave cylinder

https://youtu.be/JpzefqEeVGE

and

https://www.2carpros.com/articles/clutch-doesnt-work-sometimes-or-not-at-all

Please run down this guide and report back.

Hi horoderd,

Yes, you can adjust but make sure there is enough free play left, failing which the clutch is going to give you a lot of problems.

1. At pedal neutral start switch make sure the stopper rubber on the pedal is intact before attempting to adjust. Adjusting the neutral start switch would lower the pedal to reduce free play.

2. If you do not want to lower the pedal, the you have to adjust the master cylinder push rod length to reduce the free play.

Hello,

There is no adjustment you just pump the clutch pedal until all air has been removed (self bleeding) Here is a video where they replace the clutch and pump the pedal to get the adjustment

https://youtu.be/JpzefqEeVGE

Please run down this guide and report back.

There are no adjustments on hydraulic clutches. There are clutch pedal travel adjustments on some of these but if the clutch is not engaging until half pedal throw then most likely there is air still in the line.

Here are some guides that will help with bleeding the clutch plus I attached the instructions below:

https://www.2carpros.com/articles/clutch-doesnt-work-sometimes-or-not-at-all

https://www.youtube.com/watch?v=EpBMj5ZY_bo

Please run through this material and let me know what questions you have. Thanks