I have a trouble code PO204. The thing about this is I took the fuel rail off and cleaned the injectors the other day never seen this code before now. I was very careful I know how to handle delicate items and when I had it all done every thing was fine except the PO204. The car runs good no miss no surging. I even put number four injector in 2 and 2 in 4 but I still have a PO204 I thought it might go to two you know injector problem but no. So does any one have any experience with this. Thankl You
SPONSORED LINKS
Friday, October 16th, 2015 AT 8:51 PM
3 Replies
MHPAUTOS
MECHANIC
31,937 POSTS
Arse you sure that this is an active code and not a history code, do a code clear and re test to see if it is active, I would expect to see a misfire with this code as active.
Was this
answer
helpful?
Yes
No
+1
Saturday, October 17th, 2015 AT 5:01 AM
RANDY SHARP
MEMBER
165 POSTS
I cleared the codes and it came back PO204 but the car runs good I tested the resistance in it and it was good tested the power and signal also good.I have never seen this code it appeared after I had the fuel rail off and I cleaned the injectors. I have been trying to find the vacuum leak but I have not found it yet but you can tell it has one. Thank you
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Saturday, October 17th, 2015 AT 7:09 PM
MHPAUTOS
MECHANIC
31,937 POSTS
Are you spraying a little starter fluid around the manifold this can help find minor vacuum leaks.