2003 Dodge Van engine missing

Tiny
SRDU7993
  • MEMBER
  • 2003 DODGE VAN
  • V8
  • RWD
  • AUTOMATIC
  • 88,500 MILES
My engine is missing. The engine codes say "random multiple misses" "Cylinder 2 and 7" I changed the plug, and wire on number 7 but no change. I then changed the distributor cap but still no change and the codes read the same. What should I check now?
SPONSORED LINKS
Tuesday, January 6th, 2015 AT 7:36 AM

5 Replies

Tiny
CADIEMAN
  • MECHANIC
  • 3,544 POSTS
U WILL NEED TO DO A COMPRESSION TEST. TO CK. FOR A DEAD MISS THAT CAN BE CAUSED BY A VALVE OR BAD RINGS. U ARE NOT GOING TO REPAIR THIS BY THROWING PARTS AT IT. U HAVE REPLACED EVERYTHING ALL READY! THEN IF U CAN'T FIND IT U WILL NEED TO PUT IT ON A SCOPE
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Tuesday, January 6th, 2015 AT 9:31 AM
Tiny
SRDU7993
  • MEMBER
  • 2 POSTS
Could a bad sensor or sensors cause that symptom?
Was this
answer
helpful?
Yes
No
Tuesday, January 6th, 2015 AT 10:38 AM
Tiny
CADIEMAN
  • MECHANIC
  • 3,544 POSTS
NO BECAUSE ONLY 2 CYLINDERS ARE SETTING THE CODES. U NEED TO TEST THE COMPRESSION!
Was this
answer
helpful?
Yes
No
Tuesday, January 6th, 2015 AT 11:08 AM
Tiny
SRDU7993
  • MEMBER
  • 2 POSTS
Will do thanks
Was this
answer
helpful?
Yes
No
Tuesday, January 6th, 2015 AT 11:29 AM
Tiny
CADIEMAN
  • MECHANIC
  • 3,544 POSTS
OK
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Tuesday, January 6th, 2015 AT 11:31 AM

Please login or register to post a reply.

Related General Content

GUIDE
Inquire Here

Sponsored links