It say's in the instruction's you have to remove top and bottom steering column cover's but you only have to remove the top on it just pop's off no screw's. Then unplug the switch and and push in the two release tab's and it will slide out. Super easy to do.
Headlamp Switch Replacement
Removal Procedure
1. Remove the steering column trim covers.
2. Press the tabs while pulling the switch assembly outwards.
3. Disconnect the wire connector.
4. Remove the switch.
Installation Procedure
1. Install the wire connector.
2. Slide the switch assembly until it clicks in place.
3. Install the steering column trim covers.
Image (Click to make bigger)
SPONSORED LINKS
Wednesday, December 22nd, 2010 AT 1:25 AM