SPONSORED LINKS

2001 Hyundai Accent TCM

Tiny
GHOSTY
  • MEMBER
  • 2001 HYUNDAI ACCENT
  • 123,000 MILES
After cold start the vehicle shifts fine and then after it runs for a few minutes the car will not shift and then when you start the car up again the same thing happens and each time you start the vehicle will shift fine then stop shifting at all. Could it be the TCM Module and where is the location? And location for the TCM module fuse. WHat other problem could it be.
SPONSORED LINKS
Wednesday, August 21st, 2013 AT 6:26 AM

5 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
This sounds more like a case/valve body problem. Have a trans guy check this out.
Was this
answer
helpful?
Yes
No
Wednesday, August 21st, 2013 AT 6:51 AM
Tiny
GHOSTY
  • MEMBER
  • 3 POSTS
Case/valve body problem? I don't understand what this is?
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, August 21st, 2013 AT 11:38 AM
Tiny
GHOSTY
  • MEMBER
  • 3 POSTS
Could the overfill of transmission fluid cause this to happen?
Was this
answer
helpful?
Yes
No
Wednesday, August 21st, 2013 AT 12:02 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Case and or valve body problem is in the transmission itself. If it shifts ok cold then it's got an internal leak or crack the tcm if bad would show up on a scan. A trans guy will do tat anyhow.
Was this
answer
helpful?
Yes
No
Wednesday, August 21st, 2013 AT 12:02 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
It the trans was overfilled to much it would spill it out the vent when hot.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, August 21st, 2013 AT 12:03 PM

Please login or register to post a reply.

Related Transmission Computer TCM Location Content

VIEW MORE

Sponsored links