SPONSORED LINKS

Timing

Tiny
ROBBRICHARD
  • MEMBER
  • 2001 DODGE STRATUS
  • 4 CYL
  • FWD
  • AUTOMATIC
Yesterday I changed the water pump on my girlfriends 2001 dodge stratus 2.4L 4cyl
bought a special puller to remove crank pulley
i must have knocked the cams out car runs rough now
pulled it back apart & noticed the marks on the cams don't line up right
there is a small arrow on the crank gear, a large mark on the cam & directly across on the other side of the gear there is a small mark
can someone tell me how to get these marks all lined up & where to line up the crank
she couldn't afford to take it to the dealer if I knew it was this bad I wouldn't have tried to do it for her
now i'm in the dog house (help)
SPONSORED LINKS
Tuesday, May 17th, 2011 AT 3:14 AM

3 Replies

Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
Put no.1 piston on its compression stroke/TDC and align cam and crank as shown below
Image (Click to make bigger)
Thumb
Was this
answer
helpful?
Yes
No
+1
Tuesday, May 17th, 2011 AT 9:02 AM
Tiny
ROBBRICHARD
  • MEMBER
  • 14 POSTS
Here is the timing marks
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
+1
Tuesday, May 17th, 2011 AT 6:45 PM
Tiny
ROBBRICHARD
  • MEMBER
  • 14 POSTS
Here is the timing marks
Image (Click to make bigger)
Thumb
Was this
answer
helpful?
Yes
No
Tuesday, May 17th, 2011 AT 6:48 PM

Please login or register to post a reply.

Related Ignition Timing Content

VIEW MORE

Sponsored links