Is it possible to tighten Flywheel on a 2001 Chevy Blazer without removing the housing or starter?
Jan 29, 2011 at 10:51 PM
loose flywheel
2001 CHEVROLET BLAZER
BYDZINE2
- MEMBER
- 1 POST
Advertisement
WRENCHTECH
- ✓ASE Certified Mechanic
- 20,761 POSTS
Please don't post links to other forums here.
If you are referring to the bolts that hold the flywheel to the crankshaft, the transmission has to be removed for that. If you're referring to the torque converter bolts, you should have a removable inspection plate to access them but I see no reason that any of these bolts would be loose. It would be more like a cracked flywheel.
If you are referring to the bolts that hold the flywheel to the crankshaft, the transmission has to be removed for that. If you're referring to the torque converter bolts, you should have a removable inspection plate to access them but I see no reason that any of these bolts would be loose. It would be more like a cracked flywheel.
Jan 29, 2011 at 11:36 PM
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.