2000 Hyundai Sonata fuel line

2000 HYUNDAI SONATA
150,000 MILES • 2.5L • V6 • FWD • AUTOMATIC
Avatar
BILLKBENTLEY
  • MEMBER
  • 2 POSTS
I am replacing the 2 foot fuel hose that goes into the fuel injectors. The hose disconnected easily from the fuel injectors line but it won't disconnect from the metal fuel line that runs under the car. How do I get it disconnected from the metal fuel line bolt.
Mar 3, 2014 at 3:23 PM
Advertisement
Avatar
HMAC300
  • ✓ASE Certified Mechanic
  • 48,601 POSTS
  • ASE Certified Mechanic
it's probably crimped you need apro to replace this line. yo also need to make sure it is the correctlien otherwise it will break when you start car
Mar 4, 2014 at 7:20 AM
Avatar
BILLKBENTLEY
  • MEMBER
  • 2 POSTS
It is the fuel line bolt that won't unscrew from the metal line
Mar 4, 2014 at 9:51 AM
Avatar
HMAC300
  • ✓ASE Certified Mechanic
  • 48,601 POSTS
  • ASE Certified Mechanic
try penetrating oil and if it screws intor aluminum let it heat up a little then try to unscrew it.
Mar 4, 2014 at 11:59 AM
Join 2CarPros for free, one of the most advanced car repair communities on the internet. From first-time drivers to seasoned mechanics, everyone is welcome to reply, share details, and get better answers. You can add a temporary image or video first; uploads are limited to 20 MB.
Ask a Free Question
Repair Safety Notice: This information is for general instructional purposes only. Vehicle repair can be dangerous. Verify all information, follow manufacturer service procedures, use proper tools and safety equipment, and consult a qualified repair shop when needed.