I doubt it's related but the P0457 is basically the code for a huge EVAP leak. It could be the cap, filler neck, or other large leak. What it means is that the system tried to run the EVAP test, and it couldn't generate any vacuum or pressure change at all. With the common large, medium and small leak tests that show that it can pull a vacuum or raise the pressure in the system, but it leaks down based on the leak.
The reason I asked on the other codes is that they don't show for the 09
The standard is P= Powertrain, C= Chassis, B= Body, U= Communication
Then the second digit 0= Generic OBD II 1, 2, 3= Manufacturer specific prefix.
Third digit is the specific system involved 1-8
1 Fuel or air metering system (MAF, MAP intake related etc)
2 Fuel or air injection system
3 Ignition system
4 Emissions system
5 Speed and idle control system
6 Computer control issue
7 and 8 Transmission-related
The fourth and fifth and any suffix ids are the specific error code 0-99 plus added suffix.
The C1632 does show as a valid Chrysler code for other models as - Error Left Low Beam headlight and the Journey does use a similar control system so it could be a bad low beam or something that mimics it. Any headlight issues? Attached is the wiring for that corner.
P3537 = Powertrain, Manufacturer, Speed or idle, Code 37 This one doesn't show up, any other symptoms?
Image (Click to make bigger)
Monday, May 15th, 2023 AT 8:32 AM