SPONSORED LINKS

Stalling at idle 99 626

Tiny
ADAMPLAT
  • MEMBER
  • 1999 MAZDA 626
  • 4 CYL
  • FWD
  • AUTOMATIC
I recently had to change the Plugs and wires in my 99 mazda 626 due to a CEL for loss of #3 compression. It worked fine for a day and now I am idleing rough and stalling if I drop under 750 rpms any Ideas?
Saturday, December 18th, 2010 AT 1:12 PM

1 Reply

Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,755 POSTS
If you are getting a #3 cylinder misfire, remove the plug and check its condition. Check compression in that cylinder, check for spark to that plug, and check the injector to that cylinder to make sure it is getting fuel. If the same code has not come back, check fuel pump pressure, for vacuum leaks, and check the idle air control valve (IAC).
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Tuesday, February 8th, 2011 AT 7:33 PM

Please login or register to post a reply.

Related Engine Stall At Idle Content

Engine Stalls After Dead or New Battery
GUIDE
Engine Stalls After Dead or New Battery
So you installed a new battery and now the engine stalls? You have done nothing wrong because believe it or not this is normal. The engine computer has a learning cycle...
VIEW MORE

Sponsored links