99 silverado 4 wheel drive lights flash and will not engage. I already replaced actuator and selector switch on dash.
Monday, January 30th, 2012 AT 11:22 PM
5 Replies
HMAC300
MECHANIC
48,601 POSTS
Is the actuator getting POwer? Is the switch getting power.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Tuesday, January 31st, 2012 AT 12:27 AM
POINTER
MEMBER
3 POSTS
Yes to both. But I dont know on what pins (4 total) should have power or when to the actuator. Ordered a Dorman 600-901 4WD Transfer Case Shift Motor Encoder last night. Could this be the problem? If not its returnable. Thanks
Was this
answer
helpful?
Yes
No
Tuesday, January 31st, 2012 AT 12:49 PM
HMAC300
MECHANIC
48,601 POSTS
Thoseare teh number 1 cause of your problem. If you really need the schematic I can send it later just let me know
Was this
answer
helpful?
Yes
No
-1
Tuesday, January 31st, 2012 AT 12:51 PM
POINTER
MEMBER
3 POSTS
"those are the number 1 cause" do you mean the actuator or the encoder?
Was this
answer
helpful?
Yes
No
Tuesday, January 31st, 2012 AT 12:57 PM
HMAC300
MECHANIC
48,601 POSTS
Encoder motor. I'll send you the schematic later so you cancheck both though