SPONSORED LINKS

It turns over fine just will not run?

Tiny
BRANDONKIRBY
  • MEMBER
  • 1998 GMC SONOMA
  • 301,000 MILES
My truck wont start, it turns over fine just will not run. It backfires so I went and got new timing chain and put it on (lining the timing marks up) and it still wont start. I went and got new crankshaft and camshaft sensors and put them on and still wont start. The button is clean and set correctly. I dont know? Any ideas.
SPONSORED LINKS
Monday, November 5th, 2012 AT 3:51 AM

1 Reply

Tiny
SQM
  • MECHANIC
  • 6,383 POSTS
Hello,

It will be a good idea to check the distributor. Check for any play on the shaft.
It will also be helpful to check the adjustment of the distributor.
If there is play on the distributor shaft it will throw off the igniting timing.
Having a bad distributor shaft can trigger misfire and no start.

You might find this video helpful:

https://youtu.be/1C52feW4WQE

I have attached distributor diagrams for your reference.

Please let me know of any questions.
Thank you.
Images (Click to make bigger)
Thumb
Thumb
Thumb
Thumb
Thumb
Thumb
Thumb
Thumb
Thumb
Thumb
Thumb
Thumb
Thumb
Thumb
Thumb
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Wednesday, September 29th, 2021 AT 10:41 PM

Please login or register to post a reply.

Related Engine Not Cranking Over Content

Starter Not Working
GUIDE
Starter Not Working
This guide is designed to help you identify whether the issue with your non-working starter motor is due to an electrical problem or a fault within the starter motor itself...
VIEW MORE

Sponsored links