Preparation
* Battery ground cable
1. 3rd crossmember & transfer under cover
2. Exhaust front pipe
3. Heat protector
4. Starter wiring connector
o Disconnect the connector from terminals "B" and "S".
5. Mounting bolts
o Remove mounting bolts on inside and outside.
6. Starter assembly
o Remove starter assembly toward the bottom of engine.
INSTALLATION
6. Starter assembly
5. Mounting bolts Torque N.M (lb. Ft) = 40 (30)
4. Starter wiring connector
o Reconnect the connectors to terminals "B" and "S".
O Terminals "B" Torque N.M (lb. In) = 8.5 (73)
3. Heat protector
2. Exhaust front pipe
o Nuts Torque N.M (lb. Ft) = 67 (49)
o Bolts and Nuts Torque N.M (lb. Ft) = 43 (32)
1. 3rd crossmember & transfer under cover
SPONSORED LINKS
Saturday, February 5th, 2011 AT 4:52 AM