SPONSORED LINKS

Car will not crank over?

Tiny
ALLOWISHUS01
  • MEMBER
  • 1996 CHRYSLER TOWN AND COUNTRY
  • 3.8L
  • 6 CYL
  • FWD
  • AUTOMATIC
  • 130,000 MILES
We bought a new battery and it would not get any crank at all. When fully charged but when the battery starts to get low it does not crank.
Friday, January 16th, 2015 AT 10:33 AM

2 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Charge battery then reset anti theft
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Friday, January 16th, 2015 AT 12:35 PM
Tiny
KEN L
  • MASTER CERTIFIED MECHANIC
  • 47,690 POSTS
This happens when the starter or starter relay goes out, I would swap the starter relay and if that doesn't work replace the starter motor, here is the location of both and how to change them out.

1. Disconnect battery ground cable, then raise and support vehicle.
2. Remove starter motor attaching bolts and nuts.
3. Disconnect all electrical connectors from starter motor and remove starter.
4. Reverse procedure to install.

Please watch this video it should help

https://www.youtube.com/watch?v=6YRW8fyNudY&t=35s

Check out the images (below). Please let us know what happens.
Image (Click to make bigger)
Thumb
Was this
answer
helpful?
Yes
No
Monday, October 28th, 2024 AT 6:33 PM

Please login or register to post a reply.

Related Engine Not Cranking Over Content

Starter Not Working
GUIDE
Starter Not Working
This guide is designed to help you identify whether the issue with your non-working starter motor is due to an electrical problem or a fault within the starter motor itself...
VIEW MORE

Sponsored links