1996 Chevy Cavalier

Tiny
WOLFWOMAN65
  • MEMBER
  • 1996 CHEVROLET CAVALIER
How do you change a slave cylinder in a 1996 Chevy Cavalier?
Sunday, December 5th, 2010 AT 5:41 PM

3 Replies

Tiny
BILLYMAC
  • MECHANIC
  • 2,204 POSTS
Unbolt it from the trans remove the fluid line install new one. You may need to bleed the system when done
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
-1
Sunday, December 5th, 2010 AT 5:47 PM
Tiny
WOLFWOMAN65
  • MEMBER
  • 4 POSTS
Could you please give me more details of all the steps involved? Does the axle have to come out?
Was this
answer
helpful?
Yes
No
Sunday, December 5th, 2010 AT 6:16 PM
Tiny
BILLYMAC
  • MECHANIC
  • 2,204 POSTS
Hi
sorry. Does your car have a slave cylinder inside the trans or is it bolted to the outside of the trans they use both and I am not sure which yours has. If it has an external you will see it bolted on the top of the trans with a line going to it.

If it has a internal all you will see is a line going into the trans. If it has this kind then the transmission will have to be removed and yes the axles will also to be removed if you can idenify external or internal I can give you a better description on replacing. Sorry but I have no way of knowing which yours has. Thanks for asking billymac
Was this
answer
helpful?
Yes
No
Sunday, December 5th, 2010 AT 10:49 PM

Please login or register to post a reply.

Related General Content

GUIDE
Inquire Here

Sponsored links