Fuel line

Tiny
COMTHORN
  • MEMBER
  • 1996 CHEVROLET BLAZER
  • 6 CYL
  • 100,000 MILES
How to replace fuel line in 96 Blazer 4x4
Sunday, December 12th, 2010 AT 9:07 PM

1 Reply

Tiny
JACOBANDNICKOLAS
  • MECHANIC
  • 109,700 POSTS
The fuel line must be made of the same material as the OEM. Disconnect the battery before starting. Remove the fuel tank and start there. If you are lucky and can get a pre-formed line, it is just a matter of removing and replacing. However, you will most likely have to make a new one. Purchase the steel line and with a pipe bender, bend it to fit. You will need to prepare the ends as the OEM ones were. If that isn't possible, ask at the parts store for their recommendations and what they have that will work. Remember, the line will be under a lot of pressure, so you don't want it to come off.
Was this
answer
helpful?
Yes
No
-2
Thursday, February 10th, 2011 AT 3:13 PM

Please login or register to post a reply.

Sponsored links