Idling problems

Tiny
BRIAN 25
  • MEMBER
  • 1994 FORD RANGER
  • 6 CYL
  • 2WD
  • MANUAL
  • 150,000 MILES
Have a 94 ranger 4.0. Im having idling problems if im driving and come to a stop the rpm's stay up at 1700 for a few secconds then come down. I changed the iacv and the tps. I also noticed if the truck is running and disconnect the mass air or the iacv my truck dosnt stall or have a drop in rpm's. Do I have a bad computer?



Monday, January 24th, 2011 AT 6:09 PM

5 Replies

Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
Clean the MAF sensor with an electronic cleaner CRC and test it
Was this
answer
helpful?
Yes
No
Monday, January 24th, 2011 AT 6:15 PM
Tiny
BRIAN 25
  • MEMBER
  • 4 POSTS
Cleaned the MAF didnt look dirty sprayed it down anyway let it dry and put it back. Drove the truck and its still doing it. I also checked all my vaccum lines and there connected. Any other advice?
Was this
answer
helpful?
Yes
No
Monday, January 24th, 2011 AT 7:03 PM
Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
Inspect the air tube all the way to the throttle body for leaks and also try cleaning out the EGR valve and see what happens
Was this
answer
helpful?
Yes
No
Monday, January 24th, 2011 AT 7:40 PM
Tiny
BRIAN 25
  • MEMBER
  • 4 POSTS
Intake tube looks good. The egr didnt have any soot build up on it. I do have a throttle body spacer could the gasket have gone bad? Or replace the egr?
Was this
answer
helpful?
Yes
No
Monday, January 24th, 2011 AT 8:01 PM
Tiny
RASMATAZ
  • MECHANIC
  • 75,992 POSTS
Try cleaning out the throttle body and check the gasket on it-
Was this
answer
helpful?
Yes
No
Sunday, January 30th, 2011 AT 9:59 AM

Please login or register to post a reply.

Sponsored links