1994 Chevrolet Silverado sticky brakes

Tiny
CHEVYTRUCK1
  • MEMBER
  • 1994 CHEVROLET SILVERADO
  • 4.3L
  • V6
  • RWD
  • MANUAL
  • 292,503 MILES
My brakes are sticking on my 1994 chevy truck 2 wheel drive v6 5 speed and iv replaced the calibers brake booster and the brake hoses and still they both stick in the fron t the back brakes are fine but the fronts are sticking what should I do know?
Monday, November 24th, 2014 AT 12:59 PM

3 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Have a pro check to see if there is an abs problem also see if your calipers move smoothly in the brackets as well as the pads.
Was this
answer
helpful?
Yes
No
Monday, November 24th, 2014 AT 3:07 PM
Tiny
CHEVYTRUCK1
  • MEMBER
  • 1 POST
I have iv let press off pedal by the release valve on the caliber. Then pressed the pedal and they stick. I start the engine and still they stick. Where is the abs computer located
Was this
answer
helpful?
Yes
No
Monday, November 24th, 2014 AT 7:18 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
Normally that problem that you have is the brake hoses leading to the caliper but you said you replaced them so that kinda leaves things out. The abs unit has to be scanned an dthere isn't much you can do with it other than remove it and you can't do that as your brakes won't work. The abs is mounted to the side of the master cylinder. It may be the master cylinder but that is just a guess as I would really need to see it physically to further diagnose this. I suggest you have a pro look at this.
Was this
answer
helpful?
Yes
No
Tuesday, November 25th, 2014 AT 6:52 AM

Please login or register to post a reply.

Sponsored links