1993 Mercury Villager Power steering hose leak

Tiny
STURMSSK
  • MEMBER
  • 1993 MERCURY VILLAGER
  • 183,000 MILES
Need picture of power steering hoses after they leave the power steering fluid reservoir and extend down behind engine block and connect to power steering rack or the front-wheel-drive transaxle steering mechanism on my 1993 Mercury Villager LS. No leak in reservoir or hose connects when I replace the p.S. Fluid, but after I start it and turn steering wheel from side to side, fluid pours or is expelled from I assume a p.S. Hose at a point I can't see down closer to the axle than the top of the serpentine belt. I have searched for days for a picture or diagram as specific to my van as possible with no luck. I have to make the repair myself, and while I have installed a new muffler, door locks, side power rearview mirrors, and a starter on Chevy Monte Carlo and Plymouth Voyager I once owned, I'm not that comfortable being underneath a vehicle anymore. So, when I climb under there, I want to know exactly what I'm looking at, can replace the hoses or whatever and get out of there. If you can find one looking from the firewall forward to back of engine down, I sure would appreciate it! Thank you so much for your help!
Thursday, July 18th, 2013 AT 4:31 PM

3 Replies

Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
This is the only pic we have.
Was this
answer
helpful?
Yes
No
Friday, July 19th, 2013 AT 6:16 AM
Tiny
STURMSSK
  • MEMBER
  • 2 POSTS
This is absolutely great, hmac300! Tells me exactly what I wanted to know and is directly in line with what I can see from topside. Thank you ever so much!

"Mom" to 2 recent college grads and 1 teenager
Was this
answer
helpful?
Yes
No
Friday, July 19th, 2013 AT 1:51 PM
Tiny
HMAC300
  • MECHANIC
  • 48,601 POSTS
We can't always give pics like that cause we don't have them either. We do our best
Was this
answer
helpful?
Yes
No
Friday, July 19th, 2013 AT 3:06 PM

Please login or register to post a reply.

Sponsored links