SPONSORED LINKS

1992 Toyota MR2 power steering failure

Tiny
JOYCE HOUSER
  • MEMBER
  • 1992 TOYOTA MR2
  • 130,000 MILES
Power steering went out and PS light came on. Fluid was empty so we added power steering fluid - didn't make a difference. There isn't any fluid visibly leaking out. Looks like the power steering has its own pump - what would be the next step in troubleshooting this issue?
SPONSORED LINKS
Tuesday, July 16th, 2013 AT 7:55 PM

1 Reply

Tiny
CARADIODOC
  • MECHANIC
  • 33,916 POSTS
When the power steering fluid disappears with no visible leaks, suspect the rack and pinion assembly. The fluid will leak into one of the bellows boots around an inner tie rod end, then it will run into the other boot through the transfer tube. Remove either small clamp from one of the boots, then use a pick or small flat blade screwdriver to pull it open a little. If power steering fluid comes running out, replace the rack.
SPONSORED LINKS
Was this
answer
helpful?
Yes
No
Tuesday, July 16th, 2013 AT 9:28 PM

Please login or register to post a reply.

Related Fluid Content

How to Check and Add Power Steering Fluid
VIDEO
How to Check and Add Power Steering Fluid
Instructional repair video
Steering Fluid Level Check
GUIDE
Steering Fluid Level Check
Some vehicles are designed with a hydraulic steering assist system which depends on hydraulic fluid to build pressure and help turn the front wheels. In this guide we will...

Sponsored links