1990 Mazda B2600 Would it Fit?

95BEAR

MEMBER
1990 MAZDA B2600
4 CYL
4WD
MANUAL
171,000 MILES

Would a radiator in a 1990 Toyota SR5 4x4 with a 3.0 V6 fit in a 1990 Mazda B2600I LE-5 4x4 with a 4cyl engine?
Also wondering about door panels, back glass, bumper and cigarette lighter socket?
Last thing. There's a decent size hole in the bed of the Mazda can I just take some aluminum or steel and use a wire feed mig welder on it? Need to know what type of metal and if advised or not?

The cigarette lighter for the Mazda burned out and the ones at the auto parts stores wont fit even when they say they do. They all have ridges on the sides and the stock don't so I would have to make notches to make it fit.

4 Replies

WRENCHTECH

MECHANIC
20,761 POSTS

Of course not. You're not even in the same manufacturer. Some parts will interchange between a couple years of the exact same make and model but not all.

Was this

answer

helpful?

Yes

No

Sunday, October 5th, 2014 AT 5:29 AM

95BEAR

MEMBER
11 POSTS

Expert? Im not sure about that. You say it wont fit because of different manufacturer? Then how come 1990 Ford Ranger parts work on my Mazda?

SPONSORED LINKS

Was this

answer

helpful?

Yes

No

Sunday, October 5th, 2014 AT 6:53 AM

WRENCHTECH

MECHANIC
20,761 POSTS

Because the Mazda pick up and the Ranger are the exact same vehicle, made in the same plant. Toyota and Mazda have no such joint venture. Make sure you know what you're talking about before you start throwing insults out there.

Was this

answer

helpful?

Yes

No

Sunday, October 5th, 2014 AT 7:31 AM

95BEAR

MEMBER
11 POSTS

Didn't mean it as an insult. Many bumpers from other makes and models fit same with cig lighters. I just want to know if they would fit from a yota. Just need it close enough to weld.

Was this

answer

helpful?

Yes

No

Sunday, October 5th, 2014 AT 11:33 PM